I have had several requests for custom modules. These have consisted of anything from simple faceplate integration to unique one-off designs. These jobs have all been a lot of fun to work on and I've assembled some of them here for you to see: |
John Frusciante's triple LPG This is a triple LPG made for Chilli Peppers guitarist John Fruciante. The circuitry is uniquely different from the original and features a new LED drive and a buffered feedback loop into the sallen-key to minimalize leakage to a quarter of a mv.
This module is 3 RU high for intergration into John's Doepfer/Analogue System's rig. You can click on the image for a larger view.
Visit John Frusciante's website here
 |
Steve Roach's dual Analog Shift Register I packaged two of Ken Stone's excellent ASRs for composer/sound artist Steve Roach. I added a link switch which allows Steve to format them as either 2 indepentant three output shffters, or a single six output ASR.
Click here to get information on Ken Stone's Analog Shift Register |
 |
Gino Robair's quad LPG This is a quad LPG made for Gino Robair to fit into his Frac system. You can click on the image for a larger view. |
 |
Frac'd Model 15 This is a custom conversion of a Plan B Model 15 VCO made for GIno Robair. |
 |
NIN's Quad LPG This is a quad LPG made for Nine Inch Nails keyboardist Alessandro Cortini.
|
John Duval's custom panel o'fun This was a rather humungus project. It's a 19 x 7 panel made to integrate seamlessly into John's massive Fist of God Serge system. It consists of (left to right) four of my Triple Event Timers, a quad LPG and two 5-input voltage processors. You can click on this picture for a larger view.
Click here to see the 2003 rendering of John's ever-changing beast known as the Fist of God |
Dennis Verschoor's Serge (ish) VCO panel (in process) This is the first of two custom Serge format panels done for Dennis Verschoor. It is a completion of a panel currently in his 3.5 panel system which contains two NTOs alone with the remainder of the panel blank. I fit that blank space with four Model 15 VCOs done in Serge format. The NTO are to the left, with the four Model 15s filling out the remainder of this panel's space. Click the image above to see the concept drawing. |
|
Dennis Verschoor's Serge (ish) Panel 2
This is the second custom Serge panel for Dennis Verschoor. It is a completion of a panel currently in his 3.5 panel system which contains a Wilson Analog Delay and Stereo Output Mixer alone. I added a Quad Lowpass Gate, a Dual Processor, a Doepfer ADSR and Ken Stone's ASR otwo of them). Click the image above to see the concept drawing. |
Gary Chang's MIlton Sequencer This is film composer Gary Chang's Milton. You'll notice a row of pots next to the transport controls to the left of the module. Each has an associated jack. These are bank offset inputs with full +/- processing which allows for transposition of each bank. The outputs for these are underneath.
|
 |
Dan Levey's Sawtooth Animator This is a Eurorack faceplate transplant on a Cynthia Sawtooth Animator done for Dan Levey |
 |
Gary Chang's Frac'd Encore Frequency Shifter This is a repackage of an Encore Frequency Shifter for integration into a frac rack system. I have also added a vactrol based voltage contrallable mix output which allows for blending of the UP and DOWN outputs by either a pot or voltage control. |
